Peerless-AV SUA737 - Installation - Manual (Page 6)

6 of 23 ISSUED: 12-15-11 SHEET #: 095-9371-2 03-08-12
For VESA 200 x 200 mounting pattern
Insert two 12mm screws (L, N, O) into top two holes of display, leaving approximately 1/4" (6mm) of exposed
thread. Hook screws onto keyslots of front plate as shown.
Insert two 12mm screws (L, N, O) into bottom holes of adapter plate as shown. Tighten all fasteners.
2
FRONT PLATE
• Tighten screws so display brackets are fi rmly attached to display. Do not tighten with excessive force.
Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causing
screw heads to become detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
WARNING
2-1
1/4"
L, N, O
L, N, O