Peerless-AV ST24D - Installation - Manual (Page 8)

8 of 9 ISSUED: 09-15-05 SHEET #: 202-9032-4 10-04-11
Mounting and Removing Flat Panel Screen
Hook tilt bracket assembly (BB) onto wall plate (AA). Then slowly swing screen in as shown. To lock the screen
down, tighten security screw to wall plate using security allen wrench (FF) as shown in detail 1.
Screen can be adjusted horizontally if desired.
To remove screen from mount, loosen security screws, swing screen away from mount, and lift screen off of mount.
3
BB
AA
DETAIL 1
SECURITY
SCREWS
AA
BB
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
WARNING