Warning, Fr s t, Rm, n, o m, n, o u, v, w r – Peerless-AV PC932C-W - Installation User Manual

Page 9

9 of 35

ISSUED: 11-29-07 SHEET #: 202-9263-2 08-17-11

Choose hole pattern as shown below. Attach adapter plate
(R) to back of display using four M4 screws (M or N) as
shown below.
NOTE: If screw (M or N) gets less than three threads of
engagement, attach adapter plate (R) to back of display
using four M4 x 20 mm screws (O) and four spacers (P) as
indicated below.

Choose hole pattern as shown below. Attach adapter plate
(R) to back of display using four M6 or M8 screws (U, V,
W) as shown below.

FOR VESA 200 x 100 MOUNTING PATTERN:

Choose hole pattern as shown below. Attach
adapter plate (R) to back of display using four
M4 screws (M, N, O) as shown below.

Attach tilt bracket (F) onto adapter plate (R) using
four M5 x 6 mm screws (S) and #10 washers (T) as
shown.

Attaching Adapter Plate to Display with VESA 200 or 200 x 100 Mounting Pattern

M, N, O

U, V, W

• If screws don't get three complete turns in the

display inserts or if screws bottom out and bracket is
still not tightly secured, damage may occur to display
or product may fail.

WARNING

FOR VESA 200 MOUNTING PATTERN USING
M4 SCREWS:

FOR VESA 200 MOUNTING PATTERN USING
M6 OR M8 SCREWS:

5-1