Warning, Caution, Ef e – Peerless-AV SC590 - Installation User Manual

Page 11: Mounting and removing flat panel display, Detail 3

11 of 12

ISSUED: 08-08-12 SHEET #: 009-9074-1

Mounting and Removing Flat Panel Display

Hook adapter brackets (F) onto universal plate (E),
then slowly swing display in as shown. Turn safety
screws, using security allen wrench (Q), clockwise
at least six times to prevent display from being
removed as shown in detail 3.

NOTE: To lock the display down, tighten safety
screws to wall plate as shown in cross section.

To remove display from mount, loosen safety
screws, swing display away from mount, and lift
display off of mount.

• Always use an assistant or mechanical lifting equipment to safely lift and position the fl at panel display.

WARNING

DETAIL 3

SAFETY

SCREWS

All other brand and product names are trademarks or registered trademarks of their respective owners.

Peerless Industries, Inc.

2300 White Oak Circle

Aurora, Il 60502

www.peerlessmounts.com

• Do not tighten screws with excessive force.

Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.

CAUTION