Peerless-AV SC560FK - Installation - Manual (Page 6)

6 of 11 ISSUED: 09-30-11 SHEET #: 009-9057-3 05-23-12
Attach column (B) to base (A) with three
3/8-16 x 2-1/2" button socket cap screws (L) and
three M10 lock washers (J). Tighten screws using
7/32" allen wrench (N).
Attach tilt plate (D) to bottom plate (V) with four
M10 x 15 mm button socket cap screws (K).
Tighten screws using 6 mm allen wrench (M).
Attach the column bracket (C) to column (B) with
three 3/8-16 x 1" button socket cap screws (G).
Tighten screws using 7/32" allen wrench (N).
Attach tilt plate (D) to column bracket (C) with four
5/16-18 x 3/8" button socket cap screws (I) as
shown in rear view.
Tilt can be adjusted to 0° or 30°.
3
5
4
6
REAR VIEW
D
K
D
V
C
C
I
G
B
A
L
J
B