Peerless-AV IWB600-UNIV - Installation - Manual (Page 8)

8 of 18 ISSUED: 11-09-10 SHEET #: 125-9158-4 12-21-10
2
B
A
J
NOTE: MAKE SURE THAT
VERTICAL SUPPORTS ARE
LONGER THAN HEIGHT OF THE
OBSTACLE
MEASURE HEIGHT
OF THE OBSTACLE
Measure the height of the obstacle that the white board needs to cover.
Using information gathered secure top vertical supports ( A) to bottom vertical supports (B) using
four M5 x 8 mm phillips screws ( J).
Repeat using second top and bottom vertical supports ( A and B).
1
Select white board from cart.
Use selected white board measurement to determine placement of top adjusting brackets ( D).
Determine Top Depth Adjusting Bracket Position
X"
D
Determine Top Depth Adjusting Bracket Position
WHITE BOARD X"
MANUFACTURE
ActivBoard
46.38"
Interwrite 39.62"
Hitachi 43.68"
Marsh 46.38"
SMART 40.50"
NOTE: VERIFY DIMENSIONS
OF WHITE BOARD
DEDICATED MOUNTING