Peerless-AV IWB600-UNIV - Installation - Manual (Page 18)

18 of 18 ISSUED: 11-09-10 SHEET #: 125-9158-4 12-21-10
support bracket
(supplied with Marsh Board)
support fastener
(supplied with Marsh Board)
J
WHITEBOARD
10
Secure bottom depth adjusting brackets ( F) to mounting surface using two screws provided by
installer, and 1/4 washers ( I) if required as shown in detail 8.
NOTE: Make sure mounting surface is suitable to hold the weight of the mount and smart board.
9
Screws provided by
installer
I
Mounting Bottom Depth Adjusting Bracket
To set desired whiteboard depth loosen eight M5 x 8 mm phillips screws ( J) installed in step 2.
DETAIL 8
© 2010, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.