G or h k j – Peerless-AV HG442-HT3-S - Installation User Manual

Page 7

ISSUED: 02-28-08 SHEET #: 090-9143-2 04-28-08

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-729-0307 or 708-865-8870.

7 of 7

All other brand and product names are trademarks or registered trademarks of their respective owners.

G or H

LCD
STAND

NOTE: Carefully place screen on LCD stand to reduce the change of displacing it before fully cured.
Slide screen onto LCD stand until screen mounting holes and LCD stand mounting holes align as shown in fig. 5.1.
Attach screen to LCD stand using fasteners that come with your screen.

Security Option:

Attach screen to LCD stand using four M6 x 20 mm socket pin screws (G), used for the 32" and

37" screens or M6 x 65 mm penta-pin

™

screws (H), used for the 42" screen with four split washers (K) and four flat

washers (J) as shown in figure 5.2. Tighten with 4 mm security allen wrench (L) or penta-pin

™

driver (I).

Screen may appear
slightly different
than illustrated

fig 5.1

fig 5.2

MOUNTING SURFACE NOT
SHOWN FOR CLARITY