PowerWalker VFI 6000LE Plus - Manual (Page 26)

23
3.13 Indication summary in normal operation
LED
Operating
mode
Load level
Battery
level
1 2 3 4 5 6
Buzzer beep
once
0~50% None
50~75% None
75~100% None
Line mode
>100% Every 0.5 sec
No output Every 2 min
0~50% Every 2 min
50~75% Every 2 min
75~100% Every 2 min
Bypass
mode
>100% Every 0.5 sec
0~100% 0~25% Every sec
0~100% 25~50% Every 4 sec
0~100% 50~75% Every 4 sec
0~100% 75~100% Every 4 sec
Battery
mode
>100% Every 0.5 sec
0~100% 0~25% Every sec
0~100% 25~50% Every 4 sec
0~100% 50~75% Every 4 sec
0~100% 75~100% Every 4 sec
Battery test
mode
>100% Every 0.5 sec
: Lightened constantly
: Flash once every second
: Flash once every 4 seconds
: Depend on the original display
*Note: In this case, it indicates there is no output in bypass mode. The
causes may be that the mains input is out of range or the output is set to
disable in bypass mode. Check the mains input, check the bypass
output setting, or turn on the UPS.