PowerWalker VFI 6000LE Plus - Manual (Page 15)

12
2. Installation
2.1 Installation Safety Instructions
Installation Personnel
Installation Environment
Do not install and operate the UPS when water condensation
happen which may occur if the UPS is moved directly from a cold to
a warm environment. The UPS must be absolutely dry before being
installed and operated. Please allow an acclimatization time of at
least 2 hours. Otherwise there is hazard of electric shock!
Do not install the UPS in the environment where it is damp or
would be exposed to direct sunlight or near heat. Ensure the UPS is
far away from water, inflammable gas and corrosive agents.
Do not block air vents in the housing of UPS. The UPS must
be installed in a location with good ventilation. Ensure enough space
on each side for ventilation.
This product must be installed only by qualified or
professional personnel accord to safety instructions!
You must read the following safety instructions before
installation!