American Car Craft Corvette Inner Fender Covers Polished 4Pc 2005-2013 C6+GS - Manual (Page 3)

attachment pads. Remove liner and place these on top of the previously treated
water and brake fluid caps. Press firmly to set.
9. Place the small filler cap cover so that it is flush with the gasket ridge and so that
it covers all holes without covering any part of the hood catch opening. Make note
of its position. Once you are satisfied with the position remove cover and remove
the liner from the attachment pads on the underside of the cover. Reposition and
press firmly to set.
If any questions occur during installation, please contact American Car Craft at 727
861-1500.
Thank you and enjoy your new purchase.
Note: Care must be taken when cleaning your covers. It is a good idea to lightly dust
your covers with a clean soft cloth first in order to prevent any particles from
scratching it. Then wipe (using a new clean soft cloth) with a good quality streak
free glass cleaner.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com