beautypg.com

American Car Craft Corvette Fender Caps Polished Illuminated 2005-2013 C6+GS User Manual

American Car Craft For the car

background image

AMERICAN CAR CRAFT INSTRUCTIONS

C6 CORVETTE COMPONENT LIT FENDER LINER KIT 8PC

PART#043023

patent pending

PLEASE TAKE THE TIME TO READ AND UNDERSTAND THE ENTIRE
INSTRUCTIONS BEFORE BEGINNING THIS INSTALLATION.

PARTS INCLUDED:
1-promoter packet
1-Fuse holder with 7.5 fuse
8-blue connectors

Your new accessory comes to you with a clear protective liner. This liner will help to
keep your new parts clean during installation. You will be instructed when to remove the
liner during the detailed installation.

1. to install is the long narrow fender liner cap cover. In order to install this apply

some of the adhesive promoter provided over these two fender mount locations.

2. Place the cap cover in position so that the small notch aligns with the notch in the

factory inner fender.(SEE PICTURE#1) It is important that these cap covers sit
very tightly to the inner fender rubber gasket in order to achieve adequate
clearances between the cap cover and hood when closed. (SEE PICTURES #2,#3)