American Car Craft Corvette Inner Fender Covers Polished 4Pc 2005-2013 C6+GS - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C6 CORVETTE 4-pc INNER FENDER COVERS
PART#043017
patent pending
PARTS INCLUDED:
2-long black sheet metal screws
1-9/64
th
drill bit,
1-adhesive promoter
2-attachment pads
Your new covers come to you with a protective liner. Do not remove liner until
installation is complete.
1. Passenger side installation: Prepare the top surface of the fuse box by scrubbing
first with household isopropyl alcohol until clean. Let dry and then wipe with
adhesive promoter (provided). Drivers’ side installation: prepare the surface of the
brake fluid cap and the water fill cap the same way you did the fuse box. Next
remove the rubber cowl gasket running along the top of the wiper cowl ridge,
simply pull up and off. There is a black A/C fill point line protruding from the
very right side of your radiator shroud; this aluminum tube must be in a
downward position. Achieve this by gently pushing it by hand until it is facing
down. This in no way will damage the hose and it will create clearance for your
new cover.