American Car Craft Mustang False Firewall Polished V6 & GT 2005-2009 - Manual

AMERICAN CAR CRAFT INSTRUCTION
2005-2009 MUSTANG FALSE FIREWALL
PART#273007
patent pending
PARTS INCLUDED:
1-STAINLESS FIREWALL
Your new cover comes to you with a protective liner. Do not remove liner
until installation is complete.
Your new firewall is designed to attach at the factory front wiper cowl retainers. In
order to proceed with this installation you will need to make some modifications to
create adequate clearance and proper positioning.
1. You will notice a heavy electrical harness fastened to the wiper cowl area just
above the brake booster. Remove this harness from the two white plastic fasteners
and forcibly tuck the harness between the brake booster and the cars firewall.
Next nip the white fasteners off the firewall using a nice sharp pair of tin snips.
Once this is complete it should look like the small tabs that held the fasteners in
place were never there.
2. You will notice a heavy ground cable bolted to the wiper cowl. Remove this cable
and re-bolt it to the underside making sure that the cable is routed sideways and
no longer protrudes forward.