Dual Electronics DXV3D - Manual (Page 9)

9
Press to access Display setup options:
• Startup Mode - Select Main Menu or Last to set the unit to display
either the Main Menu or the last mode of operation upon startup .
• Color - Press Start to manually adjust RGB color settings.
• Screen Saver - Select On or Off
to enable or disable screen saver .
• Touch Screen - Press Start and follow prompts to calibrate touch
screen.
Press to access Brightness setup options:
• Automatic - Select On or Off to enable or disable automatic brightness
settings, then manually adjust desired times and brightness settings.
• Manual - Use the arrow keys or sliding bar to manually adjust
brightness settings of the unit.
• Dimmer - Select On or Off to enable or disable the dimmer function.
When the dimmer is on, the backlight will be darker at night than in
daytime. When it's off, the backlight will be same all the time.
Press to access Audio setup options:
• Source Level - Adjust Source Level for each mode of operation (0-15).
• Music Field
- Use arrows to adjust balance (right to left) and fader (front to back).
- Select a Subwoofer Crossover option: Off, 80 Hz, 120 Hz or 160 Hz.
- Turn Buzzer On or Off.
- Turn Loudness On or Off.
- Adjust Subwoofer to desired level (0-15).
• Equalizer - Select desired equalizer setting.
Press to access Steering Wheel Control setup options. Touch any icon in
the menu, then press a button on the steering wheel. The icon will turns red,
and that button will control the selected function. If you can not define the
button as above, try with different levels, such as “LEVEL 1”,”LEVEL 2”.
Press to access Frequency Spacing setup options:
• Select the appropriate frequency spacing for your geographical region.
Press to access Screen Saver setup options:
• Select the desired screen saver for the unit.
Press to access Settings setup options:
• Software Upgrade - Select Start to initiate a software upgrade.
• Language Settings - Select desired language for the unit: English,
Spanish or Korean.
• Default Setting - Select Reset to reset all settings to the original factory
default.
Press to Reset the main processor to the default settings to resolve
abnormal operation or if the unit is inoperable.
General Operation
Setup Menu
OPERATION