General operation, Operation – Dual Electronics DXV3D User Manual
Page 8
![background image](/manuals/283309/8/background.png)
8
Power / Open
Volume
Mute
3.5mm A/V Input
USB Port
UltraMotion™ Menu
Main Menu
Setup Menu
Momentarily press the volume knob to turn the unit on. Press and hold the
volume knob for more than two seconds to turn the unit off.
Rotate the volume knob to increase or decrease the volume level (0-35).
Momentarily press MUTE to silence the audio. Momentarily press MUTE again
to return to the previously selected volume.
Rotating the volume knob while the
volume is muted will also cancel the mute function.
Connect external audio/video devices to the 3.5mm auxiliary A/V input on the
front panel.
Connect a USB device to play MP3/WMA files or view JPG photos. The DXV3D's
USB port supports USB playback only. To connect a phone or other device for
charging, use the USB port on the back of the unit.
The UltraMotion™ Menu displays
available modes of operation along
with time and date information. Press a
mode icon to select and begin playback
of the corresponding mode. Press the
Main Menu icon at the top of the screen
to access the Main Menu.
The UltraMotion™ display allows the
user to customize Main Menu layout by
re-arranging the mode icons on the left
and right sides of the screen. Select a
mode from the scrolling menu in the
middle of the screen, press and hold
it for 2-3 seconds, then drag it to the
desired location and release.
From the Main Menu screen:
- View/select any operational mode by touching the corresponding icon on the
right or left side of the screen.
- View/select any operational mode by touching the mode name in the scrolling
menu two times.
- Select SETUP to enter the Setup menu.
From either the Main Menu or
UltraMotion™ Menu screen, press
SETUP to access the Setup Menu.
Alternately, the Setup Menu can be
accessed by pressing the volume knob.
Select an icon on the left or right side of
the screen to adjust the following setup
options: General, Brightness, Audio,
Steering Wheel Control, Frequency Spacing, Screen Saver, Settings and Reset.
Press
to exit the Setup Menu at any time.
General Operation
OPERATION