B&B Electronics 857-18111 - Manual - Manual (Page 7)

3
Managed Modules
The IE-iMcV-E1-Mux/4 modules are installed as a Host/Remote pair. Host or Remote
configuration is selected by an onboard DIP Switch setting. By default the DIP Switch
setting is for a Host configuration. The Host/Remote pair can be remotely managed
when the HOST is installed in an iMediaChassis with an SNMP Management Module.
Port Interfaces
A fully-configured IE-iMcV-E1-Mux/4 includes the following ports:
• Four E1 ports on RJ-48 connectors short haul
• One 10/100BaseT twisted pair Ethernet port
• One fiber SFP port (requires SFP/155-ED module for each port)
• One SFP port for optical 1+1 protection.
• One Mini Jack serial RS-232 serial console port
• One user serial RS-232 data port (RJ-45)
The IE-iMcV-E1-Mux/4 is easily configured by using the serial console port
connection at the HOST side, view only at the remote end, or through an SNMP
management application such as iView².