B&B Electronics WLNN-EK-DP551 - Quick Start Guide - Manual (Page 3)

Airborne™ Evaluation Kit Quick Start Guide B&B Electronics
3
9
The device’s status will move to managed and the device will be displayed under the device type/group it
belongs to.
Right click the device and then:
1. Select Connectivity Tools
2. Select Launch Web Browser for OEM-Cfg1
10
Selecting device personality:
The EVB is shipped with the Airborne unit configured as a Serial Device server. You can change the device
functionality by selecting an appropriate personality, committing the change and restarting the unit.
To change the personality:
1. Select the Maintenance link in the top menu bar.
2. Select the Change Module Personality link in the left-hand menu.
3. Select the appropriate device personality (See Device Personality section)
4. Press Commit
5. Press Restart
The device will restart and the new personality will be active when the restart cycle has completed.
11
Refer to the section below for further information on device personalities, device configuration and set-up.