First things first, 485opdr-hs, Fast easy answers – B&B Electronics 485OPDR-HS - Quick Start Guide User Manual
Page 2: Recommended accessories, Troubleshooting, Before you begin, be sure you have the following
Fast Easy Answers...
Fast and easy on the web:
www.bb-elec.com
© 2011 B&B Electronics Manufacturing Company
1-888-948-2248 | Europe: +353 91 792444
www.bb-elec.com
Recommended Accessories
You can use your
smart phone to access
complete documentation
on our website. Simply
scan code to the right.
Dataline Surge
Suppressor
HESP4DR
DIN rail mount
power supply
MDR-20-24
First Things First...
Before you begin, be sure you have
the following:
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.bb-elec.com | E-mail: [email protected]
Q
uick
S
tart
G
uide
Document number – pn9830_R1_485OPDR-HS_3213qsg
Troubleshooting
Q. What are the factory presets?
A. “2-Wire” RS-485 half duplex operation; echo off, bias in,
termination out.
Switches 1, 2, 3, 4, 5 = ON
Switche 6 = OFF.
Switches 7, 8 = Not used.
Q. I want to use “4-Wire” RS-485 but the “4-Wire” RS485
devices do not respond with data.
A. When this unit is used to talk to a “4-Wire” device that
does not have biasing across the RS-485 receiver lines it may
be necessary to set the Transmitter to RS-422 Transmit mode:
Switch 1 = OFF.
This setting can be used providing that the master is on the
opposite side of the repeater. No other 4-Wire device can
be connected to the transmit lines on the side set for RS-422
transmit. The 485OPDRI has switches to enable separate
Transmit bias & Receive bias.
Biasing
Bias is provided by 4.7kΩ pull-up/down
resistors on the Data In lines. This value
is adequate for most applications without
termination.
485OPDR-HS
High Speed, Isolated
RS-422/485 Repeater
485OPDR-HS
Additional items required but not included:
Power Supply (10 to 30 VDC, 0.7 W)
RS-422/485 Cable