B&B Electronics 00-00347--50 - Manual - Manual (Page 10)

Connecting a USB Device
1. Install any software required to operate the USB device(s). Refer to the documentation for the USB
device(s), as required.
2. Connect the USB device to the device port on the REX unit.
3. Check that the device is detected and installed properly in the operating system.
Compatibility
The USB 2.0 Ranger 2304 complies with USB 1.1 and USB 2.0 specifications governing the design of USB
devices. However, Icron Technologies Corporation does not guarantee that all USB devices or hosts will be
compatible with the Ranger 2304, as there are a number of different characteristics that may impact the
operation of USB devices over extended distances.
9