B&B Electronics EIR508-T - Quick Start Guide User Manual
Page 2
EIR508 Series-1713qsg
6
7
8
o
Connect a stand alone PC to a port on the switch.
Change the PC’s network IP Address to allow it to
connect to the switch (ex: 192.168.16.2). Use the
default subnet mask and gateway.
o
Launch the PC’s web browser and navigate to the
switch by typing the switch’s IP address in the browser
address window.
o
Navigate the web page by clicking on the links located
on the top of the web page.
o
Click on the IP Configuration link at the top of the web
page.
o
Enter the IP Address, Subnet Mask, and Gateway
provided by your Network Administrator.
o
Save changes
o
Disconnect the stand alone PC and connect the switch
to the Network.
o
Inform your Network Administrator that the IP Address
has been changed.
o
NOTE: The User Manual contains instructions for
assigning the IP Address from a DHCP Server.
o
This step should be accomplished by your Network
Administrator.
o
Log onto the switch from a network PC.
o
Click on the Security Manager link on the top of the web
page.
o
Enter the new User Name and Password. Record this
information in the space provided below. File this
document for future reference.
o
Click the Apply button.
o
Click the “Save Configuration” link at the top of the web
page.
USER NAME: ______________________________________
PASSWORD:_______________________________________
MAC ADDRESS: ____________________________________
IP ADDRESS:_______________________________________
Basic Configuration is complete. A
comprehensive Manual is contained on the CD
ROM. Refer to this manual to configure the
advanced features of this switch.
Log into the Switch
IP Configuration
User Name and Password