B&B Electronics 105FXE-SC(ST)-15-POE - Datasheet - Manual

The N-TRON
®
105FX-POE
Unmanaged Industrial Ethernet
Switch is designed to transmit power along with data over
an Ethernet network. It is ideal for PoE capable devices
where running an AC power feed is either not possible or cost
effective. This allows an end user to power a PoE camera,
wireless access point, or any other PoE capable device without
the need for running separate wires for power. This also
makes it possible to utilize a centralized battery backup for
all these devices.
PRODUCT FEATURES
• Compact, Space Saving Package
• Full IEEE 802.3 and 802.3af Compliance
• American Bureau of Shipping (ABS) Type Approval
• EN50155 for Railway applications
• Four 10/100BaseTX RJ-45 Ports (4 PoE Ports)
• One 100BaseFX Port with ST or SC Connectors
• Unmanaged Operation
• Extended Environmental Specifi cations
•-40ºC to 85º Operating Temperature
• Automatic Detection of Connected PoE Devices
• Support for Full/Half Duplex Operation
• Auto-sensing Duplex, Speed, and MDIX (RJ-45)
• Up to 1.0 Gb/s Maximum Throughput
• Full Wire Speed Communications
• Supports 15.4 Watts per port
(13 Watts at the PD)
• Redundant Power Inputs (46-49 VDC)
• Power Fault Status LED's
• LED Link/Activity Status Indication
• LED PoE Status Indication
• Hardened Metal DIN-Rail Enclosure
PRODUCT OVERVIEW
The 105FX-POE Industrial Network Switch is designed
to meet the most demanding industrial communications
requirements by providing high throughput and minimum
downtime while also providing power to PoE capable devices
over the Ethernet network.
The 105FX-POE provides four RJ-45 auto sensing10/100BaseTX
ports. All ports are full/half duplex capable, using "state of
the art" Ethernet switching technology. All four RJ-45 ports
also act as PoE ports allowing power to pass through four of
the eight strands of CAT5 cable. Each PoE port supports up
to 15.4 watts of power. The 5th port is a 100BaseFX fi ber
optic uplink utilizing industry standard ST or SC duplex
connectors.
The
105FX-POE
auto-negotiates the speed and fl ow control
capabilities of the four TX port connections, and confi gures
itself automatically.
The
N-TRON 105FX-POE
also supports up to 2,000 MAC
addresses, enabling these products to support extremely
sophisticated and complex network architectures.
The
105FX-POE
automatically detects any PoE device
that is connected and powers it accordingly. If a PoE fault is
detected on a specific port the Auto-disconnect feature
disables PoE power on that port, allowing only data
communications to pass, reducing the risk of damaging costly
equipment.
The
105FX-POE
is an ideal candidate for providing data
and power to wireless LAN access points, network cameras,
VoIP, and other PoE capable devices. The product also helps
reduce costs by eliminating the need for electrical wiring and
electrician expenses.
The
105FX-POE
has extended operating environmental
specifications to meet the harsh needs of the industrial
environment. For cost savings and convenience the network
switch can be DIN-Rail mounted alongside Ethernet I/O or
other Industrial Equipment.
To increase reliability the
105FX-POE
provides dual
redundant power inputs. Two power LED's are also
provided on this unit indicating a valid power source on both
the redundant power inputs and also indicating when a power
fault bus occurs.
THE INDUSTRIAL NETWORK COMPANY