B&B Electronics EIRP610-2SFP-T - Quick Start Guide - Manual (Page 2)

EIRP610-2SFP-T1012qsg
IP Configuration User Name and Password
7 6
o Expand the “system tree” and select IP configuration.
o Enter the IP Address, Subnet Mask, and Gateway
provided by your Network Administrator.
o
Save changes.
o Disconnect the stand alone PC and connect the switch
to the network.
o Inform your Network Administrator that the IP Address
has been changed.
o NOTE: The User Manual contains instructions for
assigning the IP Address from a DHCP Server and
allowing the switch to be a DHCP Server.
o
o
o
This step should be accomplished by the Network
Administrator.
o
Log onto the switch from a Network PC.
o Expand the “System Tree” and select user
authentication..
o Enter the new User Name and Password. Record this
information in the space provided below. File this
document for future reference.
o Click the Apply button.
USER NAME: _____________________________________
PASSWORD:_____________________________________
MAC ADDRESS: __________________________________
IP ADDRESS: _____________________________________
Basic Configuration is complete. A
comprehensive Manual is contained on the CD
ROM. Refer to this manual to configure the
advanced features of this switch.