B&B Electronics 808-38610-11-12-13 - Datasheet - Manual

www
.
bb
-
elec
.
com
|
modular protocol-Independent, 10 gbps xFp
Fiber mode converter
iMcV-10G Converter XFP
• Interchangeable XFP modules allow for multiple fiber mode/type
conversion options (single-mode, multi-mode) as well as support for
copper XFPs
• DDMI capable XFPs are supported through SNMP when installed in a
compatible managed chassis
• Supports 3R’s signal regeneration - Re-amplify, Re-shape, Re-time
• Supports a wide range of XFP Modules with transmission speeds from
9.9 Gbps to 11.3 Gbps
• User selectable FX LinkLoss enables the operator to identify a cable
fault/failure when the unit is not used in a managed chassis
• Supports Config Control, a feature that retains the latest configuration
of a module regardless of how the initial configuration was setup;
whether by DIP Switch or SNMP Management Module
• Supports XFP Loopback (Lineside & SFI) and Loss Carry Forward
(XFP dependent)
product FEaturEs
The iMcV-10G-Converter is a dual-wide SNMP manageable module
that allows network operators to convert multiple fiber types and
wavelengths, as well as copper XFPs, within a network. It installs
in the modular, SNMP-manageable iMediaChassis series and in the
unmanaged MediaChassis series.
The iMcV-10G-Converter uses 10 Gbps XFP modules which are
capable of moving large amounts of data over long distances, for
applications such as ISPs, Data Storage, Fiber Channel and others.
The hot-swappable nature of XFPs and the numerous fiber modes
and types that are available allow for easy configuration and future
upgrading as network demands evolve.
The iMcV-10G-Converter is protocol-independent with dual XFP ports
which can provide a single conversion between copper, different
wavelengths or single-mode and multi-mode fiber, single-mode
to single-mode fiber or multi-mode to single-strand single-mode
fiber. The iMcV-10G-Converter module supports a variety of user-
configurable features such as LinkLoss, LoopBack and variable
speed XFPs.
Easily configure and manage converters with the GUI-based iView².
As an SNMP management application, iView² gives network managers
the ability to monitor and control B&B Electronic's products. iView²
runs standalone on Windows NT/XP/2000/7 or as a Web Server running
under IIS.
* SFPs Sold Separately
ordErIng InFormatIon
Model
nuMBer
FiBer FiBer Ports range
ie-iMcv-10g-Converter xFP/xFP*
860-12100
SFP 2 Various
ordErIng InFormatIon
Model
nuMBer
FiBer range
FiBer Budget
(dB)
ie-xFP Modules: 10 gbps ethernet (oC-192) with ddMi
808-38610
IE-XFP SR/10G-ED, MM850, LC 33 m 2.8
808-38611 IE-XFP LR/10G-ED, SM1310, LC 10 km 8.4
808-38612 IE-XFP ER/10G-ED, SM1550, LC 40 km 15
808-38612 IE-XFP ZR/10G-ED, SM1550/PLUS, LC 80 km 23
iView: Windows 2000/XP/Vista/Win7
iMcV-10G Converter XFP_3713ds