B&B Electronics 850-14240--74 - Manual - Manual (Page 9)

6
LED Operation
The iMcV-LIM 10/100 features several standard and diagnostic LEDs per port.
LNK
ACT
100
LFD
PNP
(AN)
PWR
100
ACT
LNK
Twisted Pair Port
Glows green when a twisted pair link is established.
Glows yellow when data is detected on the port.
Glows yellow when 100 Mbps data is detected on the
port.
Glows green when Link Fault Detection is enabled.
Glows green when Auto Negotiation mode is enabled
(transparency).
Glows green when unit has power.
Fiber Port
Glows yellow when 100 Mbps data is detected on the
port.
Glows green when data is detected on the port.
Glows green when a fiber link is established.
NOTE
Before either LNK LED will glow solid, the twisted pair and fiber optic cables must be
connected and the twisted pair crossover/ pass-through switch set correctly.