B&B Electronics 708M12-HV - Datasheet - Manual

The
N-TRON ® 708M12-HV
is an IP67 rated Fully managed Industrial
Ethernet Switch combining outstanding performance and ease of
use. It is ideally suited for connecting Ethernet enabled industrial
and/or security equipment in extreme environmental conditions.
Product Features
• IP67 Rated Hardened Metal Enclosure
• Bulkhead Mountable (Optional DIN-Rail mounting)
•
Dustproof
• Protection against low/high pressure water jets
• Temporary immersion in water
• Eight 10/100BaseTX M12 D-Coded Ports
• Auto Sensing 10/100BaseTX, Duplex, and MDIX
• -40ºC to 80ºC Operating Temperature
• Redundant Power Inputs 40-160 VDC
• ESD and surge protection diodes on all Ports
•
Confi gurable Bi-Color Fault Status LED
Fully Managed Features:
• Full SNMP and Web Browser Management
• Detailed Ring Map and Fault Location Charting
• N-Ring™ Technology with ~30ms Healing
•
N-View ™ OPC Monitoring
• Plug-and-play IGMP Support
• 802.1Q tag VLAN and Port VLAN
• 802.1p QoS and Port QoS
• LLDP (Link Layer Discovery Protocol)
•
Trunking
• Mirroring
• 802.1d, 802.1w, 802.1D RSTP
•
DHCP Client
• Optional N-TRON Auto Confi guration Device for saving and
restoring confi guration. (P/N 700-NTCD-M12)
Management Features
The
708M12-HV
offers several management functions that can be
easily confi gured using a Web Browser.
IGMP Snooping - Internet Group Management Protocol is a feature
that allows the
708M12-HV
switch to forward and fi lter multicast traffi c
intelligently.
VLAN - Virtual Local Area Network allows you to segment the switch
in order to create two or more separate local area network domains.
QoS - Quality of Service provides prioritization of network traffi c in
order to provide better network service. The primary goal of QoS is
to improve the latency of prioritized Ethernet packets required for ring
management, real-time, and other interactive applications.
Trunking - Trunking (Link Aggregation) enables multiple
physical ports to be linked together and function as one uplink to
another
N-TRON
trunking capable switch configured in the same
manner, thereby increasing the bandwidth between switches. This
configuration can provide increased bandwidth and redundancy
to applications requiring high levels of fault tolerant operation.
Port Mirroring - This function allows the traffi c on one port to be duplicated
and sent to a designated mirror port. Port mirroring can be used to monitor
Ethernet traffi c on the designated source port using the assigned mirror port.
Rapid Spanning Tree - This function allows the switch to be
confi gured in a Ring or Mesh topology, and provides support for
redundant path communications with high speed (rapid) healing
.
Remote Monitoring Options
For ease of confi guration and monitoring, the
708M12-HV
offers Web
Browser Management and N-View OLE for Process Control (OPC)
Server Software. The
N-TRON N-View
Software can be combined
with popular HMI software packages to add network traffi c monitoring,
trending, and alarming to any application using
N-TRON
switches. In
addition SNMP is available for switch link and status monitoring. The
708M12-HV
Switch Status LED can be confi gured to respond to power
failure on power input 1 or input 2, N-Ring Broken, Partial Break High,
Partial break Low, or if multiple Ring managers are detected.
N-Ring Technology
N-TRON
''s N-Ring technology offers expanded ring size capacity,
detailed fault diagnostics, and a standard healing time of ~30ms. The
708M12-HV
Ring Manager periodically checks the health of the Ring
via packets. If the Ring Manager stops receiving these health check
packets, it converts the Ring to a linear bus topology within ~30ms. In
addition to standard Ring Manager protocol, when using all
N-TRON
fully managed switches in the ring, a detailed ring map and fault location
chart will also be provided on the Ring Manager’s webbrowser and OPC
Server to identify the health status of the ring. Up to 250 fully
managed
N-TRON
switches can participate in N-Ring topologies.
Industrial Packaging and Specifi cations
The
708M12-HV
is specifi cally designed to operate in industrial
environments. The rugged IP67 enclosure combined with extended
industrial specifications and features to meet or exceed the
operating parameters of the connected equipment. These include
extended temperature ratings, extended shock and vibrations specs,
redundant power inputs, and high MTBF (greater than 2M hours).
Ease of Use
T h e 1 0 / 1 0 0 B a s e T X p o r t s a r e a u t o s e n s i n g a n d a u t o
configuring. Each copper port is automatically negotiated for
maximum speed and performance by default, but can also be hard
coded using the web browser. A high speed processor allows
wire speed capability on all 100BaseTX ports simultaneously.