B&B Electronics EIR405-SFP-T - Datasheet - Manual

www
.
bb
-
elec
.
com
|
5 Port Industrial ethernet switch,
with sFP Port for gigabit Fiber
EIR405-SFP-T
The EIR405-SFP-T is a 5 Port Unmanaged Industrial Gigabit Ethernet
Switch. In addition to 4 standard copper RJ-45 ports, it has an SFP slot to
accommodate Gigabit Fiber.
small Form-factor Pluggable (sFP) Port: The SFP Port provides
flexibility when planning a network. The slot can accept any SFP fiber
module. Modules are available in multiple formats.
high-speed transmissions: The EIR405-SFP-T includes a switch
controller that automatically senses transmission speed (10/100/1000
Mbps). The RJ-45 interface also auto-detects MDI or MDI-X, eliminating
the requirement for a crossover cable. Each port is buffered and supports
store-and-forward protocol.
dual Power input: To reduce the risk of power failure, the EIR405-SFP-T
provides two 12 to 48 VDC power inputs. If the power fails, the switch will
automatically use the secondary power input. Also, if the power goes out
the corresponding P1 or P2 LED will go out and the Fault LED will light.
The contacts for the alarm output will also open.
Flexible Mounting: The switch features a space saving IP30 metal
enclosure that can be DIN or Panel mounted.
transient Protection: The power line input on the EIR405-SFP-T offers
protection from up to 3,000 V EFT. The Ethernet ports offer up to 4,000
V ESD protection. These features make the switch more reliable and
suitable for use in harsh electrical environments.
wide operating temperature: With an operating temperature of -40
to 75°C (-40 to 167°F), this switch is suitable for use in some of the
harshest industrial environments that exist.
easy troubleshooting: There are two LED indicators for each port that
display the link status and transmission speed. Three LED indicators
for power (P1, P2 and Fault) show power status. These indicators allow
you to quickly diagnose and correct problems and ensure your network
remains reliable.
• 4 10/100/1000 Base-T Ethernet ports
• 1 SFP slot for Gigabit fiber
• 3000V EFT & 4000V ESD protection
• Dual 12 to 48 VDC power inputs
• Wide operating temperature
• NEMA TS2
Product FeAtures
AccessorIes
808-38201 - IE-SFP/1250-ED, MM850-LC, 550M
808-38200 - IE-SFP/1250-ED, SM1310-LC, 20KM
808-38203 - IE-SFP-1250-ED, SM1310/PLUS-LC, 30KM
MDR-20-24 - DIN rail mount power supply 24VDC, 1.0 A output power
MDR-40-24 - DIN rail mount power supply 24VDC, 1.7 A output power
orderIng InFormAtIon
Model nuMBer descriPtion
EIR405-SFP-T Industrial Gigabit Switch (4 Copper, 1 SFP)
EIR405-SFP-T_3713ds