B&B Electronics 102MC-FL_SC_ST - Manual - Manual (Page 6)

(Revised 8/5/2009) 6
100 Series Industrial Ethernet Switches
The 100 Series Unmanaged Industrial Ethernet Switches support high speed layer 2 switching between
ports. This series of switches are housed in a ruggedized aluminum enclosure, and provide Category-5
compliant 10/100-BaseT connections for high performance network design, and hub/repeater upgrades.
All fiber products utilize the IEEE compliant SC or ST duplex connectors for fiber optic communications.
All 10/100Base-TX ports utilize the RJ45 shielded connectors.
The 102MC/MCE is a two port unmanaged media converter that converts 10/100BaseTX copper to
100BaseFX full duplex fiber.
The 104TX, 105TX, and 108TX are affordable and share a small footprint. Each switch is capable of auto
negotiating 10/100 Mb and half/full duplex communications.
The 105FX/FXE has 4 ports similar to the 104TX, plus additional multimode fiber optic up-link port(s), capable
of 2 Kilometers of 100 Mb communications for the FX models, and up to 80 Kilometers for the FXE models
without the use of repeaters.
Key Features
• Full IEEE 802.3 & 100Base-FX Compliance
• Extended Environmental Specifications
• Support for Full/Half Duplex Operation
• LED Link/Activity Status Indication
• Autonegotiation, Autosensing Speed, Duplex, and Flow Control
• Up to 1.6 Gb/s Maximum Throughput
• Industry Standard 35mm DIN Rail Mounted Enclosure