B&B Electronics 105FXE-SC(ST)-15-POE - Manual - Manual (Page 18)

(Revised 8/5/2009) 18
KEY SPECIFICATIONS
Physical
Height:
3.5” (8.89cm)
Width: 1.489” (3.78cm)
Depth: 3.53” (8.96cm)
Weight: 0.7 lbs. (0.31kg)
Electrical
Input Voltage:
46-49 VDC
Input Current: 1.6 A @ 48 VDC (under full load)
65 mA @ 48 VDC (no POE in use, switch in full use)
Inrush Current: 26 Amp/1.3 ms @ 48VDC
Input Ripple: Less than 100 mV
Input Wire Size: 10-20 AWG
Environmental
Operating Temperature:
-40°C to 85°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 10% to 90% (Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Network Media
10BaseT:
> Cat-3 Cable
100BaseT: > Cat-5 Cable
100BaseFX: Multimode: 50-62.5/125µm Fiber
Singlemode: 7-10/125µm Fiber
Fiber Transceiver Characteristics
Fiber Length: 2km* 15km** 40km** 80km**
TX Power Min/Max -19dBm/-14dBm -15dBm/-7dBm -5dBm/0dBm -5dBm/0dBm
RX Sensitivity Max: -32dBm -34dBm -34dBm -34dBm
Wavelength: 1310nm 1310nm 1310nm 1550nm
*=Multimode ** =Singlemode
Connectors
10/100BaseTX:
RJ45 UTP Port
100BaseFX: SC or ST Duplex Port
Recommended Minimum Wiring Clearance:
Front: 2” (5.08 cm)
Top: 1" (2.54 cm)