Rainbow Electronics MAX1113 - Manual (Page 2)

MAX1112/MAX1113
+5V, Low-Power, Multi-Channel,
Serial 8-Bit ADCs
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V DD to AGND ..............................................................-0.3V to 6V
AGND to DGND .......................................................-0.3V to 0.3V
CH0–CH7, COM, REFIN,
REFOUT to AGND ...................................-0.3V to (V DD + 0.3V)
Digital Inputs to DGND ...............................................-0.3V to 6V
Digital Outputs to DGND ............................-0.3V to (V
DD + 0.3V)
Continuous Power Dissipation (T A = +70°C)
16 Plastic DIP (derate 10.53mW/°C above +70°C) ......842mW
16 QSOP (derate 8.30mW/°C above +70°C) ................667mW
16 CERDIP (derate 10.00mW/°C above +70°C) ..........800mW
20 Plastic DIP (derate 11.11mW/°C above +70°C) ......889mW
20 SSOP (derate 8.00mW/°C above +70°C) ................640mW
20 CERDIP (derate 11.11mW/°C above +70°C) ..........889mW
Operating Temperature Ranges
MAX1112C_P/MAX1113C_E................................0°C to +70°C
MAX1112E_P/MAX1113E_E .............................-40°C to +85°C
MAX1112MJP/MAX1113MJE..........................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
ELECTRICAL CHARACTERISTICS
(V DD = +4.5V to +5.5V; unipolar input mode; COM = 0V; f SCLK = 500kHz, external clock (50% duty cycle); 10 clocks/conversion
cycle (50ksps); 1µF capacitor at REFOUT; T A = T MIN to T MAX ; unless otherwise noted.)
-3dB rolloff MHz 1.5 Small-Signal Bandwidth
kHz 800
V CH_ = 4.096Vp-p, 25kHz (Note 3)
External reference, 4.096V
No missing codes over temperature
CONDITIONS
Full-Power Bandwidth
±1 Internal or external reference LSB Gain Error (Note 2)
dB -75 Channel-to-Channel Crosstalk
dB 68 SFDR Spurious-Free Dynamic Range
dB -70 THD
Total Harmonic Distortion
(up to the 5th harmonic)
LSB ±0.1
Channel-to-Channel
Offset Matching
ppm/°C ±0.8 Gain Temperature Coefficient
LSB ±1 DNL Differential Nonlinearity
UNITS MIN TYP MAX SYMBOL PARAMETER
MAX111_C/E LSB ±0.3 ±1 TUE Total Unadjusted Error
Bits 8 Resolution
dB 49 SINAD
Signal-to-Noise
and Distortion Ratio
LSB ±0.1 ±0.5 INL Relative Accuracy (Note 1)
LSB ±0.3 ±1 Offset Error
DC ACCURACY
DYNAMIC SPECIFICATIONS (10.034kHz sine-wave input, 4.096Vp-p, 50ksps, 500kHz external clock)