Rainbow Electronics ATF1508ASL User Manual
Features, Enhanced features
1
Features
•
High-density, High-performance, Electrically-erasable Complex
Programmable Logic Device
– 128 Macrocells
– 5 Product Terms per Macrocell, Expandable up to 40 per Macrocell
– 84, 100, 160 Pins
– 7.5 ns Maximum Pin-to-pin Delay
– Registered Operation up to 125 MHz
– Enhanced Routing Resources
•
Flexible Logic Macrocell
– D/T/Latch Configured Flip-flops
– Global and Individual Register Control Signals
– Global and Individual Output Enable
– Programmable Output Slew Rate
– Programmable Output Open Collector Option
– Maximum Logic Utilization by Burying a Register within a COM Output
•
Advanced Power Management Features
– Automatic 10 µA Standby for “L” Version
– Pin-controlled 1 mA Standby Mode
– Programmable Pin-keeper Inputs and I/Os
– Reduced-power Feature per Macrocell
•
Available in Commercial and Industrial Temperature Ranges
•
Available in 84-lead PLCC, 100-lead PQFP, 100-lead TQFP and 160-lead PQFP Packages
•
Advanced EE Technology
– 100% Tested
– Completely Reprogrammable
– 10,000 Program/Erase Cycles
– 20-year Data Retention
– 2000V ESD Protection
– 200 mA Latch-up Immunity
•
JTAG Boundary-scan Testing to IEEE Std. 1149.1-1990 and 1149.1a-1993 Supported
•
Fast In-System Programmability (ISP) via JTAG
•
PCI-compliant
•
3.3 or 5.0V I/O Pins
•
Security Fuse Feature
Enhanced Features
•
Improved Connectivity (Additional Feedback Routing, Alternate Input Routing)
•
Output Enable Product Terms
•
Transparent-latch Mode
•
Combinatorial Output with Registered Feedback within Any Macrocell
•
Three Global Clock Pins
•
ITD (Input Transition Detection) Circuits on Global Clocks, Inputs and I/O
•
Fast Registered Input from Product Term
•
Programmable “Pin-keeper” Option
•
V
CC
Power-up Reset Option
•
Pull-up Option on JTAG Pins TMS and TDI
•
Advanced Power Management Features
– Edge-controlled Power-down “L”
– Individual Macrocell Power Option
– Disable ITD on Global Clocks, Inputs and I/O for “Z” Parts
High-
performance
EE PLD
ATF1508AS
ATF1508ASL
Rev. 0784O–PLD–09/02
Document Outline
- Features
- Enhanced Features
- Block Diagram
- Description
- Programmable Pin-keeper Option for Inputs and I/Os
- Input Diagram
- Speed/Power Management
- I/O Diagram
- Design Software Support
- Power-up Reset
- Security Fuse Usage
- Programming
- ISP Programming Protection
- JTAG-BST Overview
- JTAG Boundary-scan Cell (BSC) Testing
- BSC Configuration Pins and Macrocells (Except JTAG TAP Pins)
- BSC Configuration for Macrocell
- Boundary Scan Definition Language (BSDL) Models for the ATF1508
- PCI Compliance
- PCI Voltage-to- current Curves for +5V Signaling in Pull-up Mode
- PCI Voltage-to- current Curves for +5V Signaling in Pull-down Mode
- PCI DC Characteristics
- PCI AC Characteristics
- Power-down Mode
- Power-down AC Characteristics(1)(2)
- Absolute Maximum Ratings*
- DC and AC Operating Conditions
- DC Characteristics(1)
- Pin Capacitance(1)
- Timing Model
- Input Test Waveforms and Measurement Levels
- Output AC Test Loads
- AC Characteristics(1)
- ATF1508AS Dedicated Pinouts
- ATF1508AS I/O Pinouts
- ATF1508AS Ordering Information
- Using “C” Product for Industrial
- ATF1508ASL Ordering Information
- Using “C” Product for Industrial
- Package Information