Rainbow Electronics ADC10D040 - Manual (Page 4)

Pin Descriptions and Equivalent Circuits
(Continued)
Pin No. Symbol Equivalent Circuit Description
45 V
CMO
This is an analog output which can be used as a reference
source and/or to set the common mode voltage of the input. It
should be bypassed with a minimum of 1 µF low ESR
capacitor in parallel with a 0.1 µF capacitor. This pin has a
nominal output voltage of 1.5V and has a 1 mA output source
capability.
43 V
RP
Top of the reference ladder. Do not drive this pin. Bypass
this pin with a 10 µF low ESR capacitor and a 0.1 µF
capacitor.
44 V
RN
Bottom of the reference ladder. Do not drive this pin.
Bypass this pin with a 10 µF low ESR capacitor and a 0.1 µF
capacitor.
ADC10D040
www.national.com 4