Rainbow Electronics MAX5858 - Manual (Page 3)

MAX5858
Dual, 10-Bit, 300Msps, Current-Output DAC with
4x/2x/1x Interpolation Filters
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(AV DD = DV DD = CV DD = 3V, AGND = DGND = CGND = 0, f DAC = 165Msps, no interpolation, external reference, V REF = 1.2V,
I FS = 20mA, output amplitude = 0dB FS, differential output, T A = T MIN to T MAX , unless otherwise noted. T A > +25°C guaranteed by
production test. T A < +25°C guaranteed by design and characterization. Typical values are at T A = +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Total Harmonic Distortion to
Nyquist
THD f DAC = 165Msps; f OUT = 5MHz -72 dB
Noise Spectral Density N D f DAC = 165Msps; f OUT = 5MHz -143 dBm/Hz
Output Channel-to-Channel
Isolation
f OUT = 5MHz 80 dB
Gain Mismatch Between
Channels
f OUT = 5MHz ±0.05 dB
Phase Mismatch Between
Channels
f OUT = 5MHz ±0.15 Degrees
Wideband Output Noise 50 pA/ √Hz
ANALOG OUTPUT
Full-Scale Output Current Range I FS 2 20 mA
Output Voltage Compliance
Range
-1.00 +1.25 V
Output Leakage Current Power-down or standby mode -5 +5 µA
REFERENCE
Reference Output Voltage V REF0
REN = AGND 1.14 1.24 1.32 V
Output-Voltage Temperature Drift TCV REF ±50 ppm/ °C
Reference Output Drive
Capability
50 µA
Reference Input Voltage Range REN = AV
DD 0.10 1.25 V
Reference Supply Rejection 0.2 mV/V
Current Gain I FS /I REF 32 mA/mA
INTERPOLATION FILTER (2x interpolation)
-0.005dB 0.398
-0.01dB 0.402
-0.1dB 0.419
Passband Width
f OUT /
0.5f DAC
-3dB 0.478
MHz/
MHz
0.604f DAC / 2 to 1.396f DAC / 2 74
0.600f DAC / 2 to 1.400f DAC / 2 62
0.594f DAC / 2 to 1.406f DAC / 2 53
Stopband Rejection
0.532f DAC / 2 to 1.468f DAC / 2 14
dB
Group Delay 18
Data
clock
cycles
Impulse Response Duration 22
Data
clock
cycles