This section describes the user interface controls, indicators, and displays
(both on-card and remote controls) for using the 9822 card. The 9822
functions can be accessed and controlled using any of the user interfaces
described here.

The format in which the 9822 functional controls, indicators, and displays
appear and are used varies depending on the user interface being used.
Regardless of the user interface being used, access to the 9822 functions (and
the controls, indicators, and displays related to a particular function) follows a
general arrangement of Function Submenus under which related controls can
be accessed (as described in Function Submenu/Parameter Submenu
Overview below).

Note:

DashBoard™ and the Remote Control Panel provide greatly simplified user
interfaces as compared to using the card edge controls. For this reason, it is
strongly recommended that DashBoard™ or a Remote Control Panel be
used for all card applications other than the most basic cases. Card edge
control codes are not included in this manual. If card-edge control is to be
used, obtain a copy of “Manual Supplement – Card-Edge Control Reference
Master List and Instructions for Using Compass

Card-edge (Local) Control

Codes” (989CEC-MS.pdf) at
www.cobaltdigital.com>Support>Documents>Reference Guides.

If you are already familiar

with using DashBoard or a

Cobalt Remote Control
Panel to control Cobalt

cards, please skip to 9822

Function Submenu List and

Descriptions (p. 3-9).