Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder - Manual (Page 87)

87
9223-OM (V2.0)
3. Uncheck the Disable checkbox corresponding to the card you wish to restore the
configuration. This step is depicted below.
4. On the Dashboard™ Tree View, right-click on the card, and select Restore
Configuration. Follow the prompts and navigate to the file you wish to restore. This
process is illustrated below
This process is discussed in further detail in the Dashboard User Manual, chapter 5, section
Restoring Configurations to Devices.
Pre-defined Templates
The 9223 offers 5 pre-defined configuration templates, as indicated below.
To load a template, just click on the Load button next to it. The pre-defined templates are;
•
Composite to Ethernet 1, 2 and ASI: This template configures both encoders to run
from composite inputs (Encoder 1 from Video 1, Encoder 2 from Video 2). Encoders are
routed to individual multicasts on both Ethernet ports, and as an MPTS to both ASI Ports.