Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder - Manual (Page 86)

86
9223-OM (V2.0)
User-Saved Configurations
The fields in the user-saved configuration are:
•
Status: This indicates whether there is a saved configuration on that particular slot. It
will contain the words Saved or Empty.
•
Name: This is an optional name for the configuration. It is not required but highly
advisable. The name can be edited at any time (even when there is no saved
configuration).
•
Config Load Button: If you click on this button, the corresponding configuration is
loaded in the 9223 card. It will replace the currently-running configuration.
Dashboard™ will take a few seconds to reload (longer if you are accessing over a wide-
area network), but the actual configuration in the 9223 is virtually instantaneous. The
Status Message Area will indicate the result of the operation.
•
Config Delete Button: If you click on this button, the corresponding configuration and
its description are deleted.
•
Config Save Button: If you click on this button, the current card configuration is saved
on the corresponding slot, possibly replacing the configuration saved there if it is not
empty.
•
Download Config: If you click on the Save button, the corresponding file is downloaded
to your computer. This feature is provided to allow configuration backups.
If you save a configuration to your computer, and later wish to restore it to the 9223, use the
following procedure:
1. On Dashboard™, open the user interface for the frame controller (slot 0).
2. Select the Data Safe tab in the configuration area.