Moog Music SUB PHATTY - Manual (Page 35)

35
MIDI OUTPUT FILTER
It is possible to filter the MIDI data that the Sub Phatty
sends so that certain data isn’t received by external
MIDI devices. To turn on the MIDI output filter, engage
Shift mode and press the
BANK 2, BANK 4, and PATCH
2 buttons. Press the C# key to send everything except
volume data. Press the D key to send data from the
keyboard,
MOD wheel, and PITCH wheel only, filtering
out everything else. Press the D# key to send only note
data when you play the keyboard. Pressing the C key
turns off the filter, ensuring that the Sub Phatty sends
all MIDI data (default).
USE PRESET VOLUME
When you load a preset, you can specify whether
its loudness is controlled by the
MASTER VOLUME’s
current setting or by the volume level that was saved
as part of the preset. Engage Shift mode and press the
BANK 2, BANK 4, and PATCH 3 buttons. Then, press
C if you want the current patch to ignore its preset
volume level, or press C# if you want it to use its preset
volume level (default).
USE PRESET MOD WHEEL
When you load a preset, you can specify whether its
modulation depth is controlled by the MOD wheel
setting that was current when you saved the patch.
Engage Shift mode and press the
BANK 2, BANK 4,
and PATCH 4 buttons. Press C# to use the preset MOD
wheel setting (default), and press C to use the current
MOD wheel position.
Filt
er OFF (Sends All Da
ta)
Send Da
ta F
rom KB, MOD & PIT
CH Only
Send All Da
ta Ex
cep
t
V
olume Da
ta
Send No
te Da
ta Only
Ignor
e Pr
eset V
olume L
e
v
el
Use Pr
eset V
olume L
e
vel
Use Curr
ent MOD Wheel P
osition
Use Pr
eset MOD
Wheel P
osition
GLOBAL PARAMETERS