Daystar KJ05001BK - Manual

Stabilizer Bar and Track Bar Lubrication
www.DaystarWeb.com
Tech Support Contact Info
[email protected]
Phone. 623.907.0081
Fax. 623.907.0088
841 South 71 st Avenue
Phoenix, AZ 85043
Before Installing your new Stabilizer Bar or Track Bar
Components, read the instructions carefully. Your
polyurethane component kit has been designed to provide
the highest quality and performance. Improper installation
could result in failure. Please use caution and have your
installation inspected by a certified mechanic
There are many types of stabilizer bars, your vehicle could have any combination
of components. Lubricate your new suspension components as shown above.
Lubricate track bars as you would double drop links. Use a Teflon based grease
on your polyurethane components, it will give you increased performance and
longevity.
IMPORTANT: Take time to clean rust and scale off the stabilizer bar, drop link,
and track bar eyes.
Before installing your new components, compare the new parts with the old
parts. Make sure you are installing the correct parts.
Note: Polyurethane bushings for drop links and track bars could be one piece or
two piece depending on the application.
Instruction Sheet P10026-02

2000 Daystar Products International Inc.
WARNING
This vehicle has been modified to enhance its performance. The steering, braking and handling of this vehicle
will differ from standard passenger cars and trucks, This vehicle handles differently from an ordinary vehicle in
driving conditions which may occur on streets, highways and off road. Avoid unnecessary abrupt maneuvers,
sudden stops, sharp turns and other driving conditions that could cause loss of control, possibly leading to a roll
over or other accident that could result in serious injury or death to driver and passengers. If larger tires are
installed the speedometer will read lower than the vehicles actual speed.
DRIVE WITH CARE, REDUCE SPEED
AND W EAR SEAT BELTS AT ALL TIMES.
This kit should be installed by a professional mechanic.