Installation steps – Daystar KT09119-1 User Manual
Page 3
Installation Steps
8. Remove the lower strut bolt and nut ( 19mm) .
9. Remove the strut from the vehicle.
10. Install the stud extenders and spacer on the top of the strut plate.
11. Reinstall the strut into the vehicle and tighten the upper strut nuts. You will have
to push up on the upper a-arm to get the strut back in.
12. Reinstall the suspension working in reverse order.
13. Recheck all bolts after 500 miles.
14. Daystar Recommends that you have your wheel alignment checked.
TOOLS NEEDED
1. Floor
Jack
2. Jack
stands
3. Wheel
chocks
4. Set of metric tools from
10mm to 19mm
5. Hammer
Bill of Materials
Part No.
Description
QTY
M03377 Frame
bushing
4
M03245 Spring
bushing
4
M03274 Exhaust
Hanger
1
S10462 Shackle
2
S10233
18mm-2.5 x150mm bolt
2
S10231 18mm-2.5x
110mm
bolt
2
S10204 18mm-2.5
nut
4
P10027 Grease
Pack
2
M20282 Front
spacer
2
S11057 Stud
Extenders
6
P10495 Instructions
1
- KJ09112BK (1 page)
- KJ09113BK-1 (1 page)
- KJ61004BK (1 page)
- KF09112BK (2 pages)
- KA09100BK (6 pages)
- KC09102BK (1 page)
- KJ60003 (1 page)
- KJ04503BK (1 page)
- KJ71043BK (4 pages)
- KT09118BK (1 page)
- KC09122-2 (2 pages)
- KF09102 (1 page)
- KJ60005 (1 page)
- KJ61003 (1 page)
- KT09120BK (4 pages)
- KT09110BK (2 pages)
- KN09107 (2 pages)
- KJ09152BK (1 page)
- KJ02001 (1 page)
- KJ09156BK-2 (4 pages)
- KJ61009BK (1 page)
- KCO9106 (8 pages)
- KG09108 (4 pages)
- KF09108 (4 pages)
- KJ71034TN (8 pages)
- KJ09117BK-2 (1 page)
- KJ61002 (1 page)
- KU70038BK-1 (4 pages)
- KJ61017 (1 page)
- KT09103BK (1 page)
- KJ61005BK (1 page)
- KC09107 (1 page)
- KJ09155BK-2 (4 pages)
- KU70035BK-2 (4 pages)
- KC09121 (2 pages)
- KT09105BK (1 page)
- KJ09153CAMO (6 pages)
- KG09109 (4 pages)
- KU70037BK-1 (4 pages)
- KJ61019BK (1 page)
- KJ09103CAMO (2 pages)
- KJ09123BK-1 (2 pages)
- KF09050 (2 pages)
- KT09116BK (3 pages)
- KT09115-1 (3 pages)