Daystar KA09100BK - Manual (Page 4)

6. With the battery tray, electrical box, and purge valve bracket
out of the way you should now be able to access the 3 upper
strut nuts.
7. Loosen the 1 clamp for the air intake hose at the air filter box and
unplug the electrical connector.
8. Release the 4 air filter cover clips.
9. Remove the lid and the air filter.
10. Disconnect the intake hose leading from the lower filter box to the
fender. Remove the three bolts retaining the lower air filter box,
pull up on the base, and remove from vehicle. You should now be
able to access the three upper strut nuts on the passenger side.
36. Lower the axle using the floor jack until the coil springs are
loose so that you can remove them.
37. Remove the stock spring isolator and place it in the supplied
lift spacer.
38. Position the coil spring spacer assembly on top of the coil
spring and be sure it is indexed properly. Install the coil spring
and spacer in the upper spring mount.