Daystar KG09121 User Manual
Page 2
![background image](/manuals/279150/2/background.png)
2 of 2
Instruction Form #P20516-01
8. Check the length of the brake hose, axle vent hose, parking brake cables, and so on for adequate
slack with the suspension hanging at full extension travel.
9. Re-torque the U-bolts after 100 miles and periodically thereafter.
Important Product Use Information
As a general rule, the taller a vehicle is the easier it will roll. We strongly recommend , because of rollover
possibility, that Seat belts and shoulder harness be worn at all times. Avoid situations where a side
rollover may occur.
Braking performance and capabilities are decreased when significantly large/heaver tires and wheels are
used. Take this into consideration while driving, also , speedometer recalibration is necessary when
larger tires are installed.
Do not add, alter, or fabricate any factory or after-market parts which increase vehicle height over the
intended height of the Daystar Product purchased. Mixing component brands, lifts, and/or combining body
lift with suspension lift voids all warranties. Daystar makes no claims regarding lifting devices and
excludes any and all implied claims. We will not be responsible for any products that are altered.
Notice to Dealer and Vehicle Owner
Any vehicle equipped with any Daystar Product must have the “Warning to driver” decal installed on the
sun visor or dash. The decal is to act a constant reminder for whoever is operating the vehicle of its
unique handling characteristics. INSTALLING DEALER— Its is your responsibility to install the warning
decal and forward these instructions on too the vehicle owner for review and to be kept in the vehicle for
service life.
After installation occurs, a qualified alignment facility is required to align the vehicle to factory specs.