Electronics VLP-24 - Manual (Page 2)

56790 Magnetic Drive, Mishawaka, IN, USA 46545 (574) 256-5001
MODEL VLP-24 MagnaValve
v
lp24data
.pu
b
5
/13
/20
0
8
4) 0-10Vdc 4) Orange 0-10Vdc Input 8) Servo Out
3) Enable 6) Blue 24Vdc Enable 9) Valve Enable
2) 24Vdc Supply 2)Red 24Vdc Supply 19) 24Vdc Supply
1) 0Vdc Common 5)Black 0Vdc Common 20) 0Vdc Common
Note: Do not restrict the media flow above the MagnaValve as this will reduce the protective “shot
blanket” on the pole pieces. Without the protective shot blanket erosion will occur, reducing the product
life span. The valve should also be mounted in a horizontal plane within 5°.
Pot-24
Manual Control
(purchase separately)
AC-24
Automatic Amps Control
(purchase separately)
Note: for best results connect 24 Vdc power supply first to the MagnaValve and then to the controller.
This reduces the voltage drop caused by the valve current. See application note AN-168 and AN-169
for more information on wiring connections. All additional wiring should be in private conduit shielded
from motor wires.