Electronics FC - Manual

FC Controller
Media Flow Controller
Features
• 120 Vac
• Monitors flow rate in lb/min and kg/min
• Digital display
• High-low alarm contacts
• Accepts remote command setpoint
• Provides analog recorder output
• Easy panel mounting
Electronics Inc.
56790 Magnetic Drive
Mishawaka, Indiana 46545 USA
(574)256-5001
www.electronics-inc.com
Rev3 01/12
Specification is subject to change without notice
MagnaValve is a registered trademark of Electronics Inc.
Description
The FC Controller provides a closed-loop system for the MagnaValve®. The MagnaValve and controller
provide accurate regulation of steel shot in shot peening and blast cleaning applications where accurate and
repeatable flow rates are desired. (See the list of compatible MagnaValves below.) The controller may operate
as a stand-alone control or work with a customer’s programmable controller via standard analog 0-10 Vdc interface.
A clear and comprehensive installation manual simplifies installation for the FC Controller and the product is
supported by the Electronics Inc. application engineering staff.
The FC Controller is compatible with these MagnaValves:
• 578
• 250-P
• 579 • 500-P
• 580
• 590
The FC Controller (right) and 120 Vac MagnaValve (left)
work together to provide accurate and repeatable
ferrous media flow rates.