Electronics FC-24 User Manual
Fc-24 controller
FC-24 Controller
Media Flow Controller
Features
• 24 Vdc
• Monitors flow rate in lb/min and kg/min
• Digital display
• High-low alarm contacts
• Accepts remote command setpoint
• Provides analog recorder output
• Easy panel mounting
• CE compliant
Electronics Inc.
56790 Magnetic Drive
Mishawaka, Indiana 46545 USA
(574)256-5001
www.electronics-inc.com
Rev 10/13
Specification is subject to change without notice
MagnaValve is a registered trademark of Electronics Inc.
Description
The FC-24 Controller provides a closed-loop system for the MagnaValve®. The MagnaValve and controller
provide accurate regulation of media in shot peening and blast cleaning applications where accurate and
repeatable flow rates are desired. (See the list of compatible MagnaValves below.) The controller may operate
as a stand-alone control or work with a customer’s programmable controller via standard analog 0-10Vdc
interface. Flow rate signal from the MagnaValve is used as the input signal.
A clear and comprehensive installation manual simplifies installation for the FC-24 Controller. In addition, the
product is supported by the Electronics Inc. application engineering staff.
The FC-24 Controller is compatible with these MagnaValves:
•
•
•
700-24
•
•
•
70-24
•
•
•
The FC-24 Controller (left) and MagnaValve (right)
work together to provide accurate and
repeatable media flow rates.