Electronics MC User Manual
Mc controller
MC Controller
MagnaValve® Media Flow Controller
Features
• Provides a power signal to the • 10-turn potentiometer setpoint
• Accepts remote command setpoint or 0 -10 Vdc from PLC
• Easy panel mounting
Description
The MC Controller provides the power signal for the manual MagnaValves series (
. It provides a 0-100% range of output to the MagnaValve using pulse width
molulation (PWM). The controller may operate alone or in conjuction with a remote 0 - 10 Vdc setpoint
command. Both wheel- and air-type MagnaValves can be used with this controller.
A clear and comprehensive installation manual simplifies installation for the MC Controller and the
product is supported by the Electronics Inc. application engineering staff.
Electronics Inc.
56790 Magnetic Drive
Mishawaka, Indiana 46545 USA
(574)256-5001
www.electronics-inc.com
Specification is subject to change without notice
Rev 1/13
MagnaValve is a registered trademark of Electronics Inc.
Available for download at www.electronics-inc.com
MC
Controller
Regulated Media Flow
Control Signal
Motor
Current
Ammeter
Media Accelerated
Media
Hopper
MagnaValve
Wheel
Desired
Motor Current
The MC Controller and MagnaValve make an open-loop system
with a wheel-type machine