Model, Specifications – Electronics LP2000VAR User Manual
Page 2
56790 Magnetic Drive, Mishawaka, IN, USA 46545 (574) 256-5001
MODEL
lp
200
0VAR
.pub
3/
4/2
0
11
Specifications
Input: 0-120Vac
@
0.225A
Output: 400-2000
lbs/min.
Temp.
Range:
0°-100° C
(32°-212° F)
Indicator: 1Red Neon Lamp
Material: Cast
Aluminum
Weight:
32 lbs/ 14 kg
CPN# 090100
Control of the VAR series MagnaValve is accomplished by using a device called a
Variac. This is a variable AC transformer that provides 0-120Vac output voltage to the
MagnaValve. With zero volts applied to the MagnaValve the permanent magnets hold
the shot. Application of voltage will cancel the permanent magnet holding force and
allow the shot to flow. Higher voltages will provide higher shot flow rates.
The Variac control is included with the MagnaValve
See also other documents in the category Electronics Relay:
- Pot-24 (2 pages)
- WM 3000-24 (2 pages)
- WM 3000-24 (10 pages)
- 500-P (10 pages)
- 500-P (2 pages)
- FC (2 pages)
- FC (21 pages)
- LP2000_VAR (2 pages)
- LP2000_VAR (13 pages)
- VLP1000_VAR (2 pages)
- LP-24 (2 pages)
- LP-24 (15 pages)
- 576-24 (2 pages)
- AC (2 pages)
- AC (25 pages)
- 578-24 (2 pages)
- 590 (8 pages)
- 590 (2 pages)
- 590-24 (2 pages)
- 590-24 (26 pages)
- 577 (2 pages)
- FC-24 (2 pages)
- FC-24 (12 pages)
- 190-AC (2 pages)
- 100 (2 pages)
- VLP-24 (2 pages)
- 0-120 Vac Variac (1 page)
- AC-24 (16 pages)
- AC-24 (2 pages)
- MC (12 pages)
- MC (2 pages)
- 179-AC (2 pages)
- VLP1000 (2 pages)
- 580-24 (2 pages)
- 178-DC (2 pages)
- 577-24 (2 pages)
- 500-24 (6 pages)
- 500-24 (2 pages)
- 180-AC (2 pages)
- LP2000 (2 pages)
- VLP1000VAR (2 pages)