RAM Mount RAM-VB-110-SW1 User Manual
Ram no-drill seat bases, Vehicle base for the, Contact information
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
Ford Expedition (1997-2013)
Ford F-150 (1997-2003)
Ford F-150 Heritage (2004)
Ford F-250 Light Duty (1997-2004)
Ford Windstar (2004-2007)
SPECIFICATIONS
Placement
Passenger side floor board, under seat
Tools required for base installation
18
mm socket
or T-55 torx
for base installation
.
Tools for
complete system assembly: pliers, phillips screw driver, #10,
½”,
9/16”
box end wrench’s.
Seat Configuration
Bucket/Bench
Construction/Finish
Steel/Black Powdercoat
Pole or Pedestal
Ordered Separately
Weight
10.7 lbs.
Dimensions
A = 15.25", B =8", C = 2.5", D = 6.25,
E = 19.75” Hole Center = 12.75”
RAM-VB-110-SW1
Notes.
One 4” riser is included with this vehicle base. Step feature allows
minimized amount of intrusion of passenger leg space. This base will
not interfere with factory installed console in most installations.
RAM No-Drill Seat Bases
National Products, Inc.
Item Number
RAM-VB-110 & RAM-VB-110-SW1
RAM-VB-110, SHOWN WITH
RAM-VB-SB4 RISER (INCLUDED)
Contact Information.