beautypg.com

RAM Mount RAM-VB-105-SW1 User Manual

Ram no-drill, Seat bases

background image

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.

Vehicle base for the

SPECIFICATIONS

Placement
Passenger side on the floor, at front of seat

Drilling Required
No - uses existing seat bolts

Seat Configuration
Bucket

Construction/Finish
Steel/Black Powdercoat

Dimensions

Pole or Pedestal
Sold Separately

4” riser included for better positioning of
pedestal in later model vehicles.

Weight: 2.1 lbs.

A = 14.75", B = 3.8", C = 1.75”
Hole Center = 13.125”

Notes

Complete Vehicle Mount

RAM-VB-105-SW1

Vehicle Base

RAM-VB-105

Low profile design keeps mount away from passenger leg
space. This base will not interfere with factory installed
console or 4WD lever.

RAM No-Drill

TM

Seat Bases

National Products, Inc.

Item Number
RAM-VB-105 & RAM-VB-105-SW1

DODGE DAKOTA (1997-2011)
DODGE DURANGO (1997-2003)

National Products, Inc.

Website: www.ram-mount.com
Email: [email protected]

8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615

National Products, Inc.

Website: www.ram-mount.com
Email: [email protected]

8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615

Vehicle base for the

INSTALLATION INSTRUCTIONS

1. Move the passenger seat back to its rearmost position and remove the front seat rail bolts on the passenger side.
2. Without moving the seat, place the No-Drill™ base over the front of the seat frame legs.
3. Align the holes in the base with those of the seat frame legs. The pedestal platform should be near the console.
4. Re-install the seat bolts and fully tighten.

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.

RAM No-Drill

TM

Seat Bases

National Products, Inc.

Item Number
RAM-VB-105 & RAM-VB-105-SW1

DODGE DAKOTA (1997-2011)
DODGE DURANGO (1997-2003)