RAM Mount RAM-VB-115-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Across Transmission hump
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket/Bench
Construction/Finish
Steel/Black Powdercoat
Dimensions
A = 11.75", B = 7.25", C = 3.4”
Hole Center = 13.5”
Pole or Pedestal
Purchased Separately
Weight
5.5 lbs.
Features
Shown In Use
Note.
Installs in minutes with no drilling required
Angled step moves pole away from passenger leg space
The RAM-VB-115 base will not fit into Ford Taurus or Mercury Sable
vehicles that contain a factory-installed console or 4WD lever.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-115
RAM-VB-115
FORD TAURUS (1995-OLDER)
FORD TAURUS (1997 GL, SIX PASSENGER MODEL)
FORD TAURUS (1998-2006 LX, SE, SIX PASSENGER MODEL)
MERCURY SABLE (1998-2007)