RAM Mount Gun Holster Bracket Clip - Manual

INSTRUCTIONS FOR GUN HOLSTER BRACKET CLIP
2. SLIDE (A) BRACKET CLIP THROUGH BELT INSERT ON HOLSTER.
National Products, Inc., 8410 Dallas Ave S., Seattle, WA 98108, (206) 763-8361 www.ram-mount.com
INSTRUCTIONS FOR GUN HOLSTER BRACKET CLIP
C. #10-24 BLACK THIN STAINLESS STEEL NYLOCK NUT (QTY. 3)
B. #10-24 X ½ BLACK PHILIPS DRIVE STEEL MACH. SCREW (QTY. 3)
D. 1/4”-20 X ½” BLACK CARRIAGE BOLT (QTY. 1)
Parts Index
A . RAM HANDGUN HOLSTER BRACKET CLIP (QTY. 1)
E. 1/4”-20 BLACK STEEL WING NUT (QTY. 1)
A
B
C
D
E
1. ATTACH BALL BASE TO BACK OF (A) BRACKET CLIP USING (B) SCREWS AND (C) NUTS.
BALL BASE MAY NOT BE INCLUDED
3. INSERT (D) CARRIAGE BOLT FROM UNDER BRACKET CLIP THROUGH BOTH SQUARE HOLES.
PRESS ENDS OF BRACKET TOGETHER AND TIGHTEN (E) WINGNUT ONTO (D) CARRIAGE BOLT.
B
C
A
D
E
A
B
C
D
E
HOLSTER NOT INCLUDED
2. SLIDE (A) BRACKET CLIP THROUGH BELT INSERT ON HOLSTER.
National Products, Inc., 8410 Dallas Ave S., Seattle, WA 98108, (206) 763-8361 www.ram-mount.com
1. ATTACH BALL BASE TO BACK OF (A) BRACKET CLIP USING (B) SCREWS AND (C) NUTS.
3. INSERT (D) CARRIAGE BOLT FROM UNDER BRACKET CLIP THROUGH BOTH SQUARE HOLES.
PRESS ENDS OF BRACKET TOGETHER AND TIGHTEN (E) WINGNUT ONTO (D) CARRIAGE BOLT.
B
C
A
D
E
BALL BASE MAY NOT BE INCLUDED
HOLSTER NOT INCLUDED
C. #10-24 BLACK THIN STAINLESS STEEL NYLOCK NUT (QTY. 3)
B. #10-24 X ½ BLACK PHILIPS DRIVE STEEL MACH. SCREW (QTY. 3)
D. 1/4”-20 X ½” BLACK CARRIAGE BOLT (QTY. 1)
Parts Index
A . RAM HANDGUN HOLSTER BRACKET CLIP (QTY. 1)
E. 1/4”-20 BLACK STEEL WING NUT (QTY. 1)
RMR-INS-GUN1
RMR-INS-GUN1